40% OFF  on tools 06/05 - see offers

40% DISCOUNT for spring until 07/04 - see offers

The Greencut PP650X telescopic pruner is the perfect tool if you need to prune branches up to 45 mm in diameter at height. It allows fast, effortless pruning and is designed for maximum ease of use.

The 12'' splitting sword bar allows you to prune with precision from ground level and up to 5 metres in length. Its powerful 65 cc, 4.9 hp 2-stroke engine reaches a maximum speed of 10,000 rpm. The cuts you make with this Greencut telescopic pruner will be very precise. The power is adjustable via the throttle on the handlebar, which also incorporates a locking system to ensure your safety.

*Warning: This product can be used at 4% with JASO FC standard synthetic oil and 2.5% with JASO FD synthetic oil.

Advantages of working with a PP650X height pruning shear
  • Working length up to 5 metres by means of extendable rods
  • Powerful 65 cc 4.9 hp 2-stroke petrol engine
  • Dual element air filter reduces engine wear and tear
  • 12" chain bar designed to minimise recoil
  • Engine locking safety system
  • Lightweight and strong aluminium frame with splitting bar

PP650X

€199.99 €249.99 -20%

PP650X

€199.99 €249.99 -20%

Technical characteristics

Product Details
SKU 1000070
Motor
Motor Petrol 2-stroke
Cylinder 65 cc
Fuel type Unleaded 95 (Blend 2.5% JASO Standard FD / Blend 4% JASO Standard FC)
Start System Manual Easy-Start
Ignition system Electronic CDI
Air filter Dual-element, quick installation/uninstallation
Carburetor With manual choke
Clutch Centrífugo de dos ferodos
Maximum speed 10.000 rpm
Minimum speed 3.000 rpm
Others
Throttle On the right handle with safety locking device
Sword
Dimensions 305 mm (12”)
High Loppers
Diameter Rod Transmission 8 mm
Transmission first stretch rod 9 splines on clutch/square 7mm on linkage
Transmission second stretch rod Square 7mm in joint/9 splines in clutch
Maximum pruning height 5 m
Diameter of the bars 26 mm
Length of the extensible bars 1m
Content box_category
1"
:2,"
2"
:"
Telescopic pole pruner by split shafts with 12” guide bar, powerful, versatile and reliable. Designed for home users looking for power and professional results in tree branch pruning tasks that require a working length of up to 5 metres.\nEquipped with a 65cc 4.9 HP 2-stroke engine that offers enough cutting power to prune branches up to 45mm in diameter.\nThe power is adjustable by means of the throttle on the handlebar, which also incorporates a locking system that guarantees your safety.\nThe Easy-Start manual starting system favors a quick engine start-up even when cold, and the dual element air filter that provides less wear to the engine and reduces maintenance.\nThe aluminium structure is light and resistant and is designed with a split shaft to easily extend the necessary working length up to 5 metres, using the 3 included 80cm telescopic shafts.\nIt also offers great autonomy of use thanks to the generous 1 litre fuel tank.\n\nBrand: GREENCUT\nModel: PP650X\nEngine: 2-stroke petrol\nCapacity: 65cc\nPower: 4.9 HP\nMaximum speed: 10,000 rpm\nMinimum speed: 3,000 rpm\nFuel tank: 1 litre\nType of fuel: mixture: 96% unleaded petrol 95 + 4% oil for 2-stroke engine\nFuel tank: with anti-drip closure\nStarting system: manual Easy-start\nCarburettor with hand primer\nAir filter: dual element, quick install/remove\nClutch type: centrifugal with two brakes\nHandlebar: ergonomic semicircular\nThrottle: on the grip with safety lock\nFrame: aluminium
split shaft\nGuide bar: 305 mm (12”)\nMaximum pruning height: 5 metres, using the 3 telescopic shafts\nShaft diameter: 26mm\nShaft thickness: 2mm\nTransmission rod diameter: 8mm\nAccessory shaft length: 80cm\nTransmission first rod section: 9 splines on clutch/square 7mm in union\nTransmission second rod section: square 7mm in union/9 splines on clutch\n\n\n1x PP650X pole pruner\n1x Pruner with 12” guide bar with cover\n3x Telescopic shafts\n1x Shoulder-type harness\n1x Safety protection kit\n1x Basic maintenance and assembly tool kit\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x PP650X pole pruner
1"
:2,"
2"
:"
Telescopic pole pruner by split shafts with 12” guide bar, powerful, versatile and reliable. Designed for home users looking for power and professional results in tree branch pruning tasks that require a working length of up to 5 metres.\nEquipped with a 65cc 4.9 HP 2-stroke engine that offers enough cutting power to prune branches up to 45mm in diameter.\nThe power is adjustable by means of the throttle on the handlebar, which also incorporates a locking system that guarantees your safety.\nThe Easy-Start manual starting system favors a quick engine start-up even when cold, and the dual element air filter that provides less wear to the engine and reduces maintenance.\nThe aluminium structure is light and resistant and is designed with a split shaft to easily extend the necessary working length up to 5 metres, using the 3 included 80cm telescopic shafts.\nIt also offers great autonomy of use thanks to the generous 1 litre fuel tank.\n\nBrand: GREENCUT\nModel: PP650X\nEngine: 2-stroke petrol\nCapacity: 65cc\nPower: 4.9 HP\nMaximum speed: 10,000 rpm\nMinimum speed: 3,000 rpm\nFuel tank: 1 litre\nType of fuel: mixture: 96% unleaded petrol 95 + 4% oil for 2-stroke engine\nFuel tank: with anti-drip closure\nStarting system: manual Easy-start\nCarburettor with hand primer\nAir filter: dual element, quick install/remove\nClutch type: centrifugal with two brakes\nHandlebar: ergonomic semicircular\nThrottle: on the grip with safety lock\nFrame: aluminium
split shaft\nGuide bar: 305 mm (12”)\nMaximum pruning height: 5 metres, using the 3 telescopic shafts\nShaft diameter: 26mm\nShaft thickness: 2mm\nTransmission rod diameter: 8mm\nAccessory shaft length: 80cm\nTransmission first rod section: 9 splines on clutch/square 7mm in union\nTransmission second rod section: square 7mm in union/9 splines on clutch\n\n\n1x PP650X pole pruner\n1x Pruner with 12” guide bar with cover\n3x Telescopic shafts\n1x Shoulder-type harness\n1x Safety protection kit\n1x Basic maintenance and assembly tool kit\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Pruner with 12” guide bar with cover
1"
:2,"
2"
:"
Telescopic pole pruner by split shafts with 12” guide bar, powerful, versatile and reliable. Designed for home users looking for power and professional results in tree branch pruning tasks that require a working length of up to 5 metres.\nEquipped with a 65cc 4.9 HP 2-stroke engine that offers enough cutting power to prune branches up to 45mm in diameter.\nThe power is adjustable by means of the throttle on the handlebar, which also incorporates a locking system that guarantees your safety.\nThe Easy-Start manual starting system favors a quick engine start-up even when cold, and the dual element air filter that provides less wear to the engine and reduces maintenance.\nThe aluminium structure is light and resistant and is designed with a split shaft to easily extend the necessary working length up to 5 metres, using the 3 included 80cm telescopic shafts.\nIt also offers great autonomy of use thanks to the generous 1 litre fuel tank.\n\nBrand: GREENCUT\nModel: PP650X\nEngine: 2-stroke petrol\nCapacity: 65cc\nPower: 4.9 HP\nMaximum speed: 10,000 rpm\nMinimum speed: 3,000 rpm\nFuel tank: 1 litre\nType of fuel: mixture: 96% unleaded petrol 95 + 4% oil for 2-stroke engine\nFuel tank: with anti-drip closure\nStarting system: manual Easy-start\nCarburettor with hand primer\nAir filter: dual element, quick install/remove\nClutch type: centrifugal with two brakes\nHandlebar: ergonomic semicircular\nThrottle: on the grip with safety lock\nFrame: aluminium
split shaft\nGuide bar: 305 mm (12”)\nMaximum pruning height: 5 metres, using the 3 telescopic shafts\nShaft diameter: 26mm\nShaft thickness: 2mm\nTransmission rod diameter: 8mm\nAccessory shaft length: 80cm\nTransmission first rod section: 9 splines on clutch/square 7mm in union\nTransmission second rod section: square 7mm in union/9 splines on clutch\n\n\n1x PP650X pole pruner\n1x Pruner with 12” guide bar with cover\n3x Telescopic shafts\n1x Shoulder-type harness\n1x Safety protection kit\n1x Basic maintenance and assembly tool kit\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">3x Telescopic shafts
1"
:2,"
2"
:"
Telescopic pole pruner by split shafts with 12” guide bar, powerful, versatile and reliable. Designed for home users looking for power and professional results in tree branch pruning tasks that require a working length of up to 5 metres.\nEquipped with a 65cc 4.9 HP 2-stroke engine that offers enough cutting power to prune branches up to 45mm in diameter.\nThe power is adjustable by means of the throttle on the handlebar, which also incorporates a locking system that guarantees your safety.\nThe Easy-Start manual starting system favors a quick engine start-up even when cold, and the dual element air filter that provides less wear to the engine and reduces maintenance.\nThe aluminium structure is light and resistant and is designed with a split shaft to easily extend the necessary working length up to 5 metres, using the 3 included 80cm telescopic shafts.\nIt also offers great autonomy of use thanks to the generous 1 litre fuel tank.\n\nBrand: GREENCUT\nModel: PP650X\nEngine: 2-stroke petrol\nCapacity: 65cc\nPower: 4.9 HP\nMaximum speed: 10,000 rpm\nMinimum speed: 3,000 rpm\nFuel tank: 1 litre\nType of fuel: mixture: 96% unleaded petrol 95 + 4% oil for 2-stroke engine\nFuel tank: with anti-drip closure\nStarting system: manual Easy-start\nCarburettor with hand primer\nAir filter: dual element, quick install/remove\nClutch type: centrifugal with two brakes\nHandlebar: ergonomic semicircular\nThrottle: on the grip with safety lock\nFrame: aluminium
split shaft\nGuide bar: 305 mm (12”)\nMaximum pruning height: 5 metres, using the 3 telescopic shafts\nShaft diameter: 26mm\nShaft thickness: 2mm\nTransmission rod diameter: 8mm\nAccessory shaft length: 80cm\nTransmission first rod section: 9 splines on clutch/square 7mm in union\nTransmission second rod section: square 7mm in union/9 splines on clutch\n\n\n1x PP650X pole pruner\n1x Pruner with 12” guide bar with cover\n3x Telescopic shafts\n1x Shoulder-type harness\n1x Safety protection kit\n1x Basic maintenance and assembly tool kit\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Shoulder-type harness
1"
:2,"
2"
:"
Telescopic pole pruner by split shafts with 12” guide bar, powerful, versatile and reliable. Designed for home users looking for power and professional results in tree branch pruning tasks that require a working length of up to 5 metres.\nEquipped with a 65cc 4.9 HP 2-stroke engine that offers enough cutting power to prune branches up to 45mm in diameter.\nThe power is adjustable by means of the throttle on the handlebar, which also incorporates a locking system that guarantees your safety.\nThe Easy-Start manual starting system favors a quick engine start-up even when cold, and the dual element air filter that provides less wear to the engine and reduces maintenance.\nThe aluminium structure is light and resistant and is designed with a split shaft to easily extend the necessary working length up to 5 metres, using the 3 included 80cm telescopic shafts.\nIt also offers great autonomy of use thanks to the generous 1 litre fuel tank.\n\nBrand: GREENCUT\nModel: PP650X\nEngine: 2-stroke petrol\nCapacity: 65cc\nPower: 4.9 HP\nMaximum speed: 10,000 rpm\nMinimum speed: 3,000 rpm\nFuel tank: 1 litre\nType of fuel: mixture: 96% unleaded petrol 95 + 4% oil for 2-stroke engine\nFuel tank: with anti-drip closure\nStarting system: manual Easy-start\nCarburettor with hand primer\nAir filter: dual element, quick install/remove\nClutch type: centrifugal with two brakes\nHandlebar: ergonomic semicircular\nThrottle: on the grip with safety lock\nFrame: aluminium
split shaft\nGuide bar: 305 mm (12”)\nMaximum pruning height: 5 metres, using the 3 telescopic shafts\nShaft diameter: 26mm\nShaft thickness: 2mm\nTransmission rod diameter: 8mm\nAccessory shaft length: 80cm\nTransmission first rod section: 9 splines on clutch/square 7mm in union\nTransmission second rod section: square 7mm in union/9 splines on clutch\n\n\n1x PP650X pole pruner\n1x Pruner with 12” guide bar with cover\n3x Telescopic shafts\n1x Shoulder-type harness\n1x Safety protection kit\n1x Basic maintenance and assembly tool kit\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Safety protection kit
1"
:2,"
2"
:"
Telescopic pole pruner by split shafts with 12” guide bar, powerful, versatile and reliable. Designed for home users looking for power and professional results in tree branch pruning tasks that require a working length of up to 5 metres.\nEquipped with a 65cc 4.9 HP 2-stroke engine that offers enough cutting power to prune branches up to 45mm in diameter.\nThe power is adjustable by means of the throttle on the handlebar, which also incorporates a locking system that guarantees your safety.\nThe Easy-Start manual starting system favors a quick engine start-up even when cold, and the dual element air filter that provides less wear to the engine and reduces maintenance.\nThe aluminium structure is light and resistant and is designed with a split shaft to easily extend the necessary working length up to 5 metres, using the 3 included 80cm telescopic shafts.\nIt also offers great autonomy of use thanks to the generous 1 litre fuel tank.\n\nBrand: GREENCUT\nModel: PP650X\nEngine: 2-stroke petrol\nCapacity: 65cc\nPower: 4.9 HP\nMaximum speed: 10,000 rpm\nMinimum speed: 3,000 rpm\nFuel tank: 1 litre\nType of fuel: mixture: 96% unleaded petrol 95 + 4% oil for 2-stroke engine\nFuel tank: with anti-drip closure\nStarting system: manual Easy-start\nCarburettor with hand primer\nAir filter: dual element, quick install/remove\nClutch type: centrifugal with two brakes\nHandlebar: ergonomic semicircular\nThrottle: on the grip with safety lock\nFrame: aluminium
split shaft\nGuide bar: 305 mm (12”)\nMaximum pruning height: 5 metres, using the 3 telescopic shafts\nShaft diameter: 26mm\nShaft thickness: 2mm\nTransmission rod diameter: 8mm\nAccessory shaft length: 80cm\nTransmission first rod section: 9 splines on clutch/square 7mm in union\nTransmission second rod section: square 7mm in union/9 splines on clutch\n\n\n1x PP650X pole pruner\n1x Pruner with 12” guide bar with cover\n3x Telescopic shafts\n1x Shoulder-type harness\n1x Safety protection kit\n1x Basic maintenance and assembly tool kit\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Basic maintenance and assembly tool kit
1"
:2,"
2"
:"
Telescopic pole pruner by split shafts with 12” guide bar, powerful, versatile and reliable. Designed for home users looking for power and professional results in tree branch pruning tasks that require a working length of up to 5 metres.\nEquipped with a 65cc 4.9 HP 2-stroke engine that offers enough cutting power to prune branches up to 45mm in diameter.\nThe power is adjustable by means of the throttle on the handlebar, which also incorporates a locking system that guarantees your safety.\nThe Easy-Start manual starting system favors a quick engine start-up even when cold, and the dual element air filter that provides less wear to the engine and reduces maintenance.\nThe aluminium structure is light and resistant and is designed with a split shaft to easily extend the necessary working length up to 5 metres, using the 3 included 80cm telescopic shafts.\nIt also offers great autonomy of use thanks to the generous 1 litre fuel tank.\n\nBrand: GREENCUT\nModel: PP650X\nEngine: 2-stroke petrol\nCapacity: 65cc\nPower: 4.9 HP\nMaximum speed: 10,000 rpm\nMinimum speed: 3,000 rpm\nFuel tank: 1 litre\nType of fuel: mixture: 96% unleaded petrol 95 + 4% oil for 2-stroke engine\nFuel tank: with anti-drip closure\nStarting system: manual Easy-start\nCarburettor with hand primer\nAir filter: dual element, quick install/remove\nClutch type: centrifugal with two brakes\nHandlebar: ergonomic semicircular\nThrottle: on the grip with safety lock\nFrame: aluminium
split shaft\nGuide bar: 305 mm (12”)\nMaximum pruning height: 5 metres, using the 3 telescopic shafts\nShaft diameter: 26mm\nShaft thickness: 2mm\nTransmission rod diameter: 8mm\nAccessory shaft length: 80cm\nTransmission first rod section: 9 splines on clutch/square 7mm in union\nTransmission second rod section: square 7mm in union/9 splines on clutch\n\n\n1x PP650X pole pruner\n1x Pruner with 12” guide bar with cover\n3x Telescopic shafts\n1x Shoulder-type harness\n1x Safety protection kit\n1x Basic maintenance and assembly tool kit\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Instruction manual
Dimensions and weight
Weight 11.66 kg
Dimensions of the product 27 x 202 x 26 cm
Box weight 13.1 kg
Product weight 11.66 kg
Box size 37.5 x 108 x 33 cm
Product dimension 27 x 202 x 26 cm

Manual

Download product manual here

Opinions

0%
0
(0 Opinions)
Log in or sign up to write a review

Get a 10% discount

Don't miss any of our news!

Subscribe to the newsletter and get a 10% discount