Content box_category
1"
:2,"
2"
:"
The MIG130 welder is a semi-automatic, compact and portable continuous wire welding equipment that can work with gas or without gas, and with which it offers MIG (Metal Inert Gas) welding functions with inert gas protection such as Argon or Helium.\nThe power is adjustable from 35A to 130A and accepts wire between 0.6mm and 0.8mm in diameter to offer professional results in welding work on metal sheets from 1mm to 3mm thick, and can practically work on any ferrous material: steel stainless, carbon steel, copper, aluminium, etc. \nIt is important that you choose the type of wire to use depending on the material to be welded and whether you are going to use gas or not. The wire is not included.\nSafety is guaranteed thanks to the air ventilation system and overheating protection, which will turn on a yellow light on the display and automatically turn off the welder if you have exceeded the recommended duty cycle.\nIn addition, it is easy to use, and is notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\n\nBrand: GREENCUT\nModel: MIG130\nVoltage: 230V (±15%) ~50Hz\nDuty cycle:\n\n100% - 120A – 24.8V\n60% - 160A – 26.4V\n40% - 200A – 28V\n\n\nPower factor: 0.93\nI1max: 14A\nI1eff: 8.5A\nInsulation type: H\nType of protection: IP21S\nCooling: air\nPower cable length: 1600mm\nGround cable length: 1200mm\n\n\n1x Welder\n1x Ground cable\n1x Welding mask\n1x Pick/brush\n1x Torch\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Welder
1"
:2,"
2"
:"
The MIG130 welder is a semi-automatic, compact and portable continuous wire welding equipment that can work with gas or without gas, and with which it offers MIG (Metal Inert Gas) welding functions with inert gas protection such as Argon or Helium.\nThe power is adjustable from 35A to 130A and accepts wire between 0.6mm and 0.8mm in diameter to offer professional results in welding work on metal sheets from 1mm to 3mm thick, and can practically work on any ferrous material: steel stainless, carbon steel, copper, aluminium, etc. \nIt is important that you choose the type of wire to use depending on the material to be welded and whether you are going to use gas or not. The wire is not included.\nSafety is guaranteed thanks to the air ventilation system and overheating protection, which will turn on a yellow light on the display and automatically turn off the welder if you have exceeded the recommended duty cycle.\nIn addition, it is easy to use, and is notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\n\nBrand: GREENCUT\nModel: MIG130\nVoltage: 230V (±15%) ~50Hz\nDuty cycle:\n\n100% - 120A – 24.8V\n60% - 160A – 26.4V\n40% - 200A – 28V\n\n\nPower factor: 0.93\nI1max: 14A\nI1eff: 8.5A\nInsulation type: H\nType of protection: IP21S\nCooling: air\nPower cable length: 1600mm\nGround cable length: 1200mm\n\n\n1x Welder\n1x Ground cable\n1x Welding mask\n1x Pick/brush\n1x Torch\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Ground cable
1"
:2,"
2"
:"
The MIG130 welder is a semi-automatic, compact and portable continuous wire welding equipment that can work with gas or without gas, and with which it offers MIG (Metal Inert Gas) welding functions with inert gas protection such as Argon or Helium.\nThe power is adjustable from 35A to 130A and accepts wire between 0.6mm and 0.8mm in diameter to offer professional results in welding work on metal sheets from 1mm to 3mm thick, and can practically work on any ferrous material: steel stainless, carbon steel, copper, aluminium, etc. \nIt is important that you choose the type of wire to use depending on the material to be welded and whether you are going to use gas or not. The wire is not included.\nSafety is guaranteed thanks to the air ventilation system and overheating protection, which will turn on a yellow light on the display and automatically turn off the welder if you have exceeded the recommended duty cycle.\nIn addition, it is easy to use, and is notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\n\nBrand: GREENCUT\nModel: MIG130\nVoltage: 230V (±15%) ~50Hz\nDuty cycle:\n\n100% - 120A – 24.8V\n60% - 160A – 26.4V\n40% - 200A – 28V\n\n\nPower factor: 0.93\nI1max: 14A\nI1eff: 8.5A\nInsulation type: H\nType of protection: IP21S\nCooling: air\nPower cable length: 1600mm\nGround cable length: 1200mm\n\n\n1x Welder\n1x Ground cable\n1x Welding mask\n1x Pick/brush\n1x Torch\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Welding mask
1"
:2,"
2"
:"
The MIG130 welder is a semi-automatic, compact and portable continuous wire welding equipment that can work with gas or without gas, and with which it offers MIG (Metal Inert Gas) welding functions with inert gas protection such as Argon or Helium.\nThe power is adjustable from 35A to 130A and accepts wire between 0.6mm and 0.8mm in diameter to offer professional results in welding work on metal sheets from 1mm to 3mm thick, and can practically work on any ferrous material: steel stainless, carbon steel, copper, aluminium, etc. \nIt is important that you choose the type of wire to use depending on the material to be welded and whether you are going to use gas or not. The wire is not included.\nSafety is guaranteed thanks to the air ventilation system and overheating protection, which will turn on a yellow light on the display and automatically turn off the welder if you have exceeded the recommended duty cycle.\nIn addition, it is easy to use, and is notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\n\nBrand: GREENCUT\nModel: MIG130\nVoltage: 230V (±15%) ~50Hz\nDuty cycle:\n\n100% - 120A – 24.8V\n60% - 160A – 26.4V\n40% - 200A – 28V\n\n\nPower factor: 0.93\nI1max: 14A\nI1eff: 8.5A\nInsulation type: H\nType of protection: IP21S\nCooling: air\nPower cable length: 1600mm\nGround cable length: 1200mm\n\n\n1x Welder\n1x Ground cable\n1x Welding mask\n1x Pick/brush\n1x Torch\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Pick/brush
1"
:2,"
2"
:"
The MIG130 welder is a semi-automatic, compact and portable continuous wire welding equipment that can work with gas or without gas, and with which it offers MIG (Metal Inert Gas) welding functions with inert gas protection such as Argon or Helium.\nThe power is adjustable from 35A to 130A and accepts wire between 0.6mm and 0.8mm in diameter to offer professional results in welding work on metal sheets from 1mm to 3mm thick, and can practically work on any ferrous material: steel stainless, carbon steel, copper, aluminium, etc. \nIt is important that you choose the type of wire to use depending on the material to be welded and whether you are going to use gas or not. The wire is not included.\nSafety is guaranteed thanks to the air ventilation system and overheating protection, which will turn on a yellow light on the display and automatically turn off the welder if you have exceeded the recommended duty cycle.\nIn addition, it is easy to use, and is notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\n\nBrand: GREENCUT\nModel: MIG130\nVoltage: 230V (±15%) ~50Hz\nDuty cycle:\n\n100% - 120A – 24.8V\n60% - 160A – 26.4V\n40% - 200A – 28V\n\n\nPower factor: 0.93\nI1max: 14A\nI1eff: 8.5A\nInsulation type: H\nType of protection: IP21S\nCooling: air\nPower cable length: 1600mm\nGround cable length: 1200mm\n\n\n1x Welder\n1x Ground cable\n1x Welding mask\n1x Pick/brush\n1x Torch\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Torch
1"
:2,"
2"
:"
The MIG130 welder is a semi-automatic, compact and portable continuous wire welding equipment that can work with gas or without gas, and with which it offers MIG (Metal Inert Gas) welding functions with inert gas protection such as Argon or Helium.\nThe power is adjustable from 35A to 130A and accepts wire between 0.6mm and 0.8mm in diameter to offer professional results in welding work on metal sheets from 1mm to 3mm thick, and can practically work on any ferrous material: steel stainless, carbon steel, copper, aluminium, etc. \nIt is important that you choose the type of wire to use depending on the material to be welded and whether you are going to use gas or not. The wire is not included.\nSafety is guaranteed thanks to the air ventilation system and overheating protection, which will turn on a yellow light on the display and automatically turn off the welder if you have exceeded the recommended duty cycle.\nIn addition, it is easy to use, and is notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\n\nBrand: GREENCUT\nModel: MIG130\nVoltage: 230V (±15%) ~50Hz\nDuty cycle:\n\n100% - 120A – 24.8V\n60% - 160A – 26.4V\n40% - 200A – 28V\n\n\nPower factor: 0.93\nI1max: 14A\nI1eff: 8.5A\nInsulation type: H\nType of protection: IP21S\nCooling: air\nPower cable length: 1600mm\nGround cable length: 1200mm\n\n\n1x Welder\n1x Ground cable\n1x Welding mask\n1x Pick/brush\n1x Torch\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Instruction manual
