Content box_category
1"
:2,"
2"
:"
The MMA300 DC inverter welder is a turboventilated welding equipment with IGBT technology designed for private users who require a powerful and reliable equipment capable of offering professional results.\nThe power is adjustable from 25A to 300A to guarantee precision welding even on the thinnest sheet metal.\nIt incorporates iGBT (Insulated Gate Bipolar Transistor) technology, which notably increases its reliability, allows for a lower power source weight, greater reliability, higher welding quality and greater energy efficiency. \nIt is also equipped with inverter technology that allows make cleaner, continuous welds, eliminating the hassle of sticking electrodes.\nIt has stable light arc, optimised charging cycle and more suitable current compensation.\nAlso easy to use and notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\nIt is recommended to use electrodes of 1.0mm-4.00mm\n\nBrand: GREENCUT\nModel: MMA300\nVoltage: 230V (±15%) 50Hz\nDuty cycle:\n\n100% - 120A – 24.8V\n60% - 160A – 26.4V\n40% - 200A – 28V\n\nPower factor: 0.93\nI1max: 30A\nI1eff: 23A\nInsulation type: H\nProtection type: IP215\nCooling: air\nPower cable length: 1600mm\nGround cable length: 1200mm\nElectrode holder cable length: 1800mm\nIt is recommended to use 1.0mm-4.00mm electrodes\n\n\n1x MMA-300 welder\n1x Ground cable\n1x Electrode holder clamp cable\n1x Welding mask\n1x Pick/brush\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:13249,"
3"
:{"
1"
:0},"
9"
:0,"
10"
:1,"
11"
:4,"
12"
:0,"
15"
:"
Arial"
,"
16"
:10}">1x MMA300 welder
1"
:2,"
2"
:"
The MMA300 DC inverter welder is a turboventilated welding equipment with IGBT technology designed for private users who require a powerful and reliable equipment capable of offering professional results.\nThe power is adjustable from 25A to 300A to guarantee precision welding even on the thinnest sheet metal.\nIt incorporates iGBT (Insulated Gate Bipolar Transistor) technology, which notably increases its reliability, allows for a lower power source weight, greater reliability, higher welding quality and greater energy efficiency. \nIt is also equipped with inverter technology that allows make cleaner, continuous welds, eliminating the hassle of sticking electrodes.\nIt has stable light arc, optimised charging cycle and more suitable current compensation.\nAlso easy to use and notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\nIt is recommended to use electrodes of 1.0mm-4.00mm\n\nBrand: GREENCUT\nModel: MMA300\nVoltage: 230V (±15%) 50Hz\nDuty cycle:\n\n100% - 120A – 24.8V\n60% - 160A – 26.4V\n40% - 200A – 28V\n\nPower factor: 0.93\nI1max: 30A\nI1eff: 23A\nInsulation type: H\nProtection type: IP215\nCooling: air\nPower cable length: 1600mm\nGround cable length: 1200mm\nElectrode holder cable length: 1800mm\nIt is recommended to use 1.0mm-4.00mm electrodes\n\n\n1x MMA-300 welder\n1x Ground cable\n1x Electrode holder clamp cable\n1x Welding mask\n1x Pick/brush\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:13249,"
3"
:{"
1"
:0},"
9"
:0,"
10"
:1,"
11"
:4,"
12"
:0,"
15"
:"
Arial"
,"
16"
:10}">1x Ground cable
1"
:2,"
2"
:"
The MMA300 DC inverter welder is a turboventilated welding equipment with IGBT technology designed for private users who require a powerful and reliable equipment capable of offering professional results.\nThe power is adjustable from 25A to 300A to guarantee precision welding even on the thinnest sheet metal.\nIt incorporates iGBT (Insulated Gate Bipolar Transistor) technology, which notably increases its reliability, allows for a lower power source weight, greater reliability, higher welding quality and greater energy efficiency. \nIt is also equipped with inverter technology that allows make cleaner, continuous welds, eliminating the hassle of sticking electrodes.\nIt has stable light arc, optimised charging cycle and more suitable current compensation.\nAlso easy to use and notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\nIt is recommended to use electrodes of 1.0mm-4.00mm\n\nBrand: GREENCUT\nModel: MMA300\nVoltage: 230V (±15%) 50Hz\nDuty cycle:\n\n100% - 120A – 24.8V\n60% - 160A – 26.4V\n40% - 200A – 28V\n\nPower factor: 0.93\nI1max: 30A\nI1eff: 23A\nInsulation type: H\nProtection type: IP215\nCooling: air\nPower cable length: 1600mm\nGround cable length: 1200mm\nElectrode holder cable length: 1800mm\nIt is recommended to use 1.0mm-4.00mm electrodes\n\n\n1x MMA-300 welder\n1x Ground cable\n1x Electrode holder clamp cable\n1x Welding mask\n1x Pick/brush\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:13249,"
3"
:{"
1"
:0},"
9"
:0,"
10"
:1,"
11"
:4,"
12"
:0,"
15"
:"
Arial"
,"
16"
:10}">1x Electrode holder clamp cable
1"
:2,"
2"
:"
The MMA300 DC inverter welder is a turboventilated welding equipment with IGBT technology designed for private users who require a powerful and reliable equipment capable of offering professional results.\nThe power is adjustable from 25A to 300A to guarantee precision welding even on the thinnest sheet metal.\nIt incorporates iGBT (Insulated Gate Bipolar Transistor) technology, which notably increases its reliability, allows for a lower power source weight, greater reliability, higher welding quality and greater energy efficiency. \nIt is also equipped with inverter technology that allows make cleaner, continuous welds, eliminating the hassle of sticking electrodes.\nIt has stable light arc, optimised charging cycle and more suitable current compensation.\nAlso easy to use and notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\nIt is recommended to use electrodes of 1.0mm-4.00mm\n\nBrand: GREENCUT\nModel: MMA300\nVoltage: 230V (±15%) 50Hz\nDuty cycle:\n\n100% - 120A – 24.8V\n60% - 160A – 26.4V\n40% - 200A – 28V\n\nPower factor: 0.93\nI1max: 30A\nI1eff: 23A\nInsulation type: H\nProtection type: IP215\nCooling: air\nPower cable length: 1600mm\nGround cable length: 1200mm\nElectrode holder cable length: 1800mm\nIt is recommended to use 1.0mm-4.00mm electrodes\n\n\n1x MMA-300 welder\n1x Ground cable\n1x Electrode holder clamp cable\n1x Welding mask\n1x Pick/brush\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:13249,"
3"
:{"
1"
:0},"
9"
:0,"
10"
:1,"
11"
:4,"
12"
:0,"
15"
:"
Arial"
,"
16"
:10}">1x Welding mask
1"
:2,"
2"
:"
The MMA300 DC inverter welder is a turboventilated welding equipment with IGBT technology designed for private users who require a powerful and reliable equipment capable of offering professional results.\nThe power is adjustable from 25A to 300A to guarantee precision welding even on the thinnest sheet metal.\nIt incorporates iGBT (Insulated Gate Bipolar Transistor) technology, which notably increases its reliability, allows for a lower power source weight, greater reliability, higher welding quality and greater energy efficiency. \nIt is also equipped with inverter technology that allows make cleaner, continuous welds, eliminating the hassle of sticking electrodes.\nIt has stable light arc, optimised charging cycle and more suitable current compensation.\nAlso easy to use and notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\nIt is recommended to use electrodes of 1.0mm-4.00mm\n\nBrand: GREENCUT\nModel: MMA300\nVoltage: 230V (±15%) 50Hz\nDuty cycle:\n\n100% - 120A – 24.8V\n60% - 160A – 26.4V\n40% - 200A – 28V\n\nPower factor: 0.93\nI1max: 30A\nI1eff: 23A\nInsulation type: H\nProtection type: IP215\nCooling: air\nPower cable length: 1600mm\nGround cable length: 1200mm\nElectrode holder cable length: 1800mm\nIt is recommended to use 1.0mm-4.00mm electrodes\n\n\n1x MMA-300 welder\n1x Ground cable\n1x Electrode holder clamp cable\n1x Welding mask\n1x Pick/brush\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:13249,"
3"
:{"
1"
:0},"
9"
:0,"
10"
:1,"
11"
:4,"
12"
:0,"
15"
:"
Arial"
,"
16"
:10}">1x Pick/brush
1"
:2,"
2"
:"
The MMA300 DC inverter welder is a turboventilated welding equipment with IGBT technology designed for private users who require a powerful and reliable equipment capable of offering professional results.\nThe power is adjustable from 25A to 300A to guarantee precision welding even on the thinnest sheet metal.\nIt incorporates iGBT (Insulated Gate Bipolar Transistor) technology, which notably increases its reliability, allows for a lower power source weight, greater reliability, higher welding quality and greater energy efficiency. \nIt is also equipped with inverter technology that allows make cleaner, continuous welds, eliminating the hassle of sticking electrodes.\nIt has stable light arc, optimised charging cycle and more suitable current compensation.\nAlso easy to use and notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\nIt is recommended to use electrodes of 1.0mm-4.00mm\n\nBrand: GREENCUT\nModel: MMA300\nVoltage: 230V (±15%) 50Hz\nDuty cycle:\n\n100% - 120A – 24.8V\n60% - 160A – 26.4V\n40% - 200A – 28V\n\nPower factor: 0.93\nI1max: 30A\nI1eff: 23A\nInsulation type: H\nProtection type: IP215\nCooling: air\nPower cable length: 1600mm\nGround cable length: 1200mm\nElectrode holder cable length: 1800mm\nIt is recommended to use 1.0mm-4.00mm electrodes\n\n\n1x MMA-300 welder\n1x Ground cable\n1x Electrode holder clamp cable\n1x Welding mask\n1x Pick/brush\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:13249,"
3"
:{"
1"
:0},"
9"
:0,"
10"
:1,"
11"
:4,"
12"
:0,"
15"
:"
Arial"
,"
16"
:10}">1x Instruction manual
