Inverter welder DC, power between 25A-180A, voltage 230V, IGBT technology and electrode kit between 1.0mm-2.5mm
€139.99
Product currently out of stock
We are sorry! This product is permanently out of stock.
Electric
Type of motor
MMA
Type
Regulable entre 25A y 180A
Power
Coated electrode
Welding
230
Voltage
If what you need is to be able to weld with efficient results and with a design for practical use, the MMA180DC inverter welder is what you are looking for. A turboventilated welding equipment with IGBT technology.
The MMA180 portable welding machine is equipped with inverter technology that provides cleaner, continuous welds, eliminating the hassle of sticking electrodes. In addition, it has a stable and exact light arc, an optimised charging cycle and a more adequate current compensation.
Its power is adjustable between 25A and 180A, so that precision in welding is guaranteed, whether it is on very double sheet metal or on thinner sheet metal. It is always recommended to use 1.0mm-2.5mm electrodes.
The IGBT (Insulated Gate Bipolar Transistor) technology notably increases its reliability, welding quality and has greater energy efficiency, thus allowing the weight of the power source to be more reduced.
Ease of use without the need for a professional.
Mobility: Convenient to transport so that it can be used when the occasion requires it.
MMA180
€139.99
MMA180
€139.99
Technical characteristics
product-details_category
SKU1010056
Type of welding
WeldingCoated electrode
TypeMMA
Motor
MotorInverter
Type of motorElectric
Battery TypeSin batería
Power
Power factor0,93
I1max30A
I1eff23A
Voltage230
Exit20A / 20,8V - 180A / 27,2V
RefrigerationAir
Components
Type of protectionIP21S
Insulation classH
Content box_category
1"
:2,"
2"
:"
If what you need is to be able to weld with efficient results and with a design for practical use, the MMA180 DC inverter welder is what you are looking for. A turboventilated welding equipment with IGBT technology.\nThe MMA180 portable welding machine is equipped with inverter technology that provides cleaner, continuous welds, eliminating the hassle of sticking electrodes. In addition, it has a stable and exact light arc, an optimised charging cycle and a more adequate current compensation.\nIts power is adjustable between 25A and 180A, so that precision in welding is guaranteed, whether it is on very double sheet metal or on thinner sheet metal. It is always recommended to use 1.0mm-2.5mm electrodes I\nGBT (Insulated Gate Bipolar Transistor) technology notably increases its reliability, welding quality and has greater energy efficiency, thus allowing the weight of the power source to be more reduced.\n\nBrand: GREENCUT\nModel: MMA180\nVoltage: 230V (±15%) ~50Hz\nDuty cycle:\n\n100% - 120A – 24.8V\n60% - 160A – 26.4V\n40% - 200A – 28V\n\n\nPower factor: 0.93\nI1max: 30A\nI1eff: 23A\nInsulation type: H\nType of protection: IP21S\nCooling: air\nPower cable length: 1600mm\nGround cable length: 1200mm\nIt is recommended to use 1.0mm-2.5mm electrodes\n\n\n1x MMA180 welder\n1x Ground cable\n1x Electrode holder cable\n1x Welding mask\n1x Pick/brush\n1x Instruction manual\n"
https://www.greencut-tools.com/en/inverter-welder-mma180/1010056Soldador inverter eléctrico MMA180<style type="text/css"><!--td {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}--></style>
<p><span data-sheets-value="{"1":2,"2":"If what you need is to be able to weld with efficient results and with a design for practical use, the MMA180 DC inverter welder is what you are looking for. A turboventilated welding equipment with IGBT technology.\nThe MMA180 portable welding machine is equipped with inverter technology that provides cleaner, continuous welds, eliminating the hassle of sticking electrodes. In addition, it has a stable and exact light arc, an optimised charging cycle and a more adequate current compensation.\nIts power is adjustable between 25A and 180A, so that precision in welding is guaranteed, whether it is on very double sheet metal or on thinner sheet metal. It is always recommended to use 1.0mm-2.5mm electrodes I\nGBT (Insulated Gate Bipolar Transistor) technology notably increases its reliability, welding quality and has greater energy efficiency, thus allowing the weight of the power source to be more reduced.\n\nBrand: GREENCUT\nModel: MMA180\nVoltage: 230V (±15%) ~50Hz\nDuty cycle:\n\n100% - 120A – 24.8V\n60% - 160A – 26.4V\n40% - 200A – 28V\n\n\nPower factor: 0.93\nI1max: 30A\nI1eff: 23A\nInsulation type: H\nType of protection: IP21S\nCooling: air\nPower cable length: 1600mm\nGround cable length: 1200mm\nIt is recommended to use 1.0mm-2.5mm electrodes\n\n\n1x MMA180 welder\n1x Ground cable\n1x Electrode holder cable\n1x Welding mask\n1x Pick/brush\n1x Instruction manual\n"}" data-sheets-userformat="{"2":12737,"3":{"1":0,"3":1},"9":0,"10":1,"11":4,"15":"Arial","16":10}" data-sheets-textstyleruns="{"1":0,"2":{"3":"Arial","4":10}}">If what you need is to be able to weld with efficient results and with a design for practical use, the <strong>MMA180</strong> <strong>DC inverter welder</strong> is what you are looking for. A turboventilated welding equipment with <strong>IGBT technology.</strong><br /></span></p>
<p><span data-sheets-value="{"1":2,"2":"If what you need is to be able to weld with efficient results and with a design for practical use, the MMA180 DC inverter welder is what you are looking for. A turboventilated welding equipment with IGBT technology.\nThe MMA180 portable welding machine is equipped with inverter technology that provides cleaner, continuous welds, eliminating the hassle of sticking electrodes. In addition, it has a stable and exact light arc, an optimised charging cycle and a more adequate current compensation.\nIts power is adjustable between 25A and 180A, so that precision in welding is guaranteed, whether it is on very double sheet metal or on thinner sheet metal. It is always recommended to use 1.0mm-2.5mm electrodes I\nGBT (Insulated Gate Bipolar Transistor) technology notably increases its reliability, welding quality and has greater energy efficiency, thus allowing the weight of the power source to be more reduced.\n\nBrand: GREENCUT\nModel: MMA180\nVoltage: 230V (±15%) ~50Hz\nDuty cycle:\n\n100% - 120A – 24.8V\n60% - 160A – 26.4V\n40% - 200A – 28V\n\n\nPower factor: 0.93\nI1max: 30A\nI1eff: 23A\nInsulation type: H\nType of protection: IP21S\nCooling: air\nPower cable length: 1600mm\nGround cable length: 1200mm\nIt is recommended to use 1.0mm-2.5mm electrodes\n\n\n1x MMA180 welder\n1x Ground cable\n1x Electrode holder cable\n1x Welding mask\n1x Pick/brush\n1x Instruction manual\n"}" data-sheets-userformat="{"2":12737,"3":{"1":0,"3":1},"9":0,"10":1,"11":4,"15":"Arial","16":10}" data-sheets-textstyleruns="{"1":0,"2":{"3":"Arial","4":10}}">The <strong>MMA180 portable welding machine</strong> is equipped with inverter technology that provides cleaner, continuous welds, eliminating the hassle of sticking electrodes. In addition, it has a stable and exact light arc, an optimised charging cycle and a more adequate current compensation.<br /></span></p>
<p><span data-sheets-value="{"1":2,"2":"If what you need is to be able to weld with efficient results and with a design for practical use, the MMA180 DC inverter welder is what you are looking for. A turboventilated welding equipment with IGBT technology.\nThe MMA180 portable welding machine is equipped with inverter technology that provides cleaner, continuous welds, eliminating the hassle of sticking electrodes. In addition, it has a stable and exact light arc, an optimised charging cycle and a more adequate current compensation.\nIts power is adjustable between 25A and 180A, so that precision in welding is guaranteed, whether it is on very double sheet metal or on thinner sheet metal. It is always recommended to use 1.0mm-2.5mm electrodes I\nGBT (Insulated Gate Bipolar Transistor) technology notably increases its reliability, welding quality and has greater energy efficiency, thus allowing the weight of the power source to be more reduced.\n\nBrand: GREENCUT\nModel: MMA180\nVoltage: 230V (±15%) ~50Hz\nDuty cycle:\n\n100% - 120A – 24.8V\n60% - 160A – 26.4V\n40% - 200A – 28V\n\n\nPower factor: 0.93\nI1max: 30A\nI1eff: 23A\nInsulation type: H\nType of protection: IP21S\nCooling: air\nPower cable length: 1600mm\nGround cable length: 1200mm\nIt is recommended to use 1.0mm-2.5mm electrodes\n\n\n1x MMA180 welder\n1x Ground cable\n1x Electrode holder cable\n1x Welding mask\n1x Pick/brush\n1x Instruction manual\n"}" data-sheets-userformat="{"2":12737,"3":{"1":0,"3":1},"9":0,"10":1,"11":4,"15":"Arial","16":10}" data-sheets-textstyleruns="{"1":0,"2":{"3":"Arial","4":10}}">Its power is adjustable between <strong>25A and 180A,</strong> so that precision in welding is guaranteed, whether it is on very double sheet metal or on thinner sheet metal. It is always recommended to use <strong>1.0mm-2.5mm electrodes.</strong></span></p>
<p><span data-sheets-value="{"1":2,"2":"If what you need is to be able to weld with efficient results and with a design for practical use, the MMA180 DC inverter welder is what you are looking for. A turboventilated welding equipment with IGBT technology.\nThe MMA180 portable welding machine is equipped with inverter technology that provides cleaner, continuous welds, eliminating the hassle of sticking electrodes. In addition, it has a stable and exact light arc, an optimised charging cycle and a more adequate current compensation.\nIts power is adjustable between 25A and 180A, so that precision in welding is guaranteed, whether it is on very double sheet metal or on thinner sheet metal. It is always recommended to use 1.0mm-2.5mm electrodes I\nGBT (Insulated Gate Bipolar Transistor) technology notably increases its reliability, welding quality and has greater energy efficiency, thus allowing the weight of the power source to be more reduced.\n\nBrand: GREENCUT\nModel: MMA180\nVoltage: 230V (±15%) ~50Hz\nDuty cycle:\n\n100% - 120A – 24.8V\n60% - 160A – 26.4V\n40% - 200A – 28V\n\n\nPower factor: 0.93\nI1max: 30A\nI1eff: 23A\nInsulation type: H\nType of protection: IP21S\nCooling: air\nPower cable length: 1600mm\nGround cable length: 1200mm\nIt is recommended to use 1.0mm-2.5mm electrodes\n\n\n1x MMA180 welder\n1x Ground cable\n1x Electrode holder cable\n1x Welding mask\n1x Pick/brush\n1x Instruction manual\n"}" data-sheets-userformat="{"2":12737,"3":{"1":0,"3":1},"9":0,"10":1,"11":4,"15":"Arial","16":10}" data-sheets-textstyleruns="{"1":0,"2":{"3":"Arial","4":10}}">The <strong>IGBT (Insulated Gate Bipolar Transistor) technology</strong> notably increases its reliability, welding quality and has greater energy efficiency, thus allowing the weight of the power source to be more reduced.<br /></span></p>https://www.greencut-tools.com/pub/media/catalog/product/m/m/mma180_01_1.jpg124.99outofstock139.99124.991115Greencut000https://www.greencut-tools.com/pub/media/catalog/product/m/m/mma180_01_1.jpg12212712833463470/Inverter welders2020-04-29T11:15:56+0000
