Content box_category
1"
:2,"
2"
:"
The welding equipment accepts 0.8mm and 1.0mm diameter wire and offers professional results in welding work on metal sheets from 1mm to 2.3mm thick. It can practically work on any ferrous material: stainless steel, copper, iron, brass, titanium, carbon steel, etc.\nWith the MMG185 welding machine, safety is guaranteed thanks to the air ventilation system and protections against overvoltage, undervoltage, overcurrent and overheating. If any mishap occurs, the alarm light on the control panel illuminates and the output current is automatically turned off to protect the equipment and prolong its service life.\nIt also has electronic variable wire feed control that allows more control of the wire feed speed.\nIt is also easy to use, and is notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\n\nBrand: GREENCUT\nModel: MMG185\nWelding types: MIG - MAG - MMA\nCan be used with or without gas\nVoltage: 230V (±15%) 50Hz\nOutput: 40A/16V - 185A/23.3V\nPower factor: 0.93\nInsulation class: H\nProtection type: IP21S\nCooling: Air turboventilated\nWire diameters: 0.8mm - 1.0mm\nWire coil: 1 kg\n Power cord length: 1.6m\nGround cable length: 1.2m\nElectrode holder cable length: 1.8 m\nIt is recommended to use electrodes between 1.6 and 3.2 mm.\n\n\n1x Welder\n1x Ground cable\n1x Electrode holder clamp cable\n1x Torch\n1x Pick/brush\n1x Drive roller for 0.8mm-1.0mm lines\n2x Nozzles\n1x Welding mask\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Welder
1"
:2,"
2"
:"
The welding equipment accepts 0.8mm and 1.0mm diameter wire and offers professional results in welding work on metal sheets from 1mm to 2.3mm thick. It can practically work on any ferrous material: stainless steel, copper, iron, brass, titanium, carbon steel, etc.\nWith the MMG185 welding machine, safety is guaranteed thanks to the air ventilation system and protections against overvoltage, undervoltage, overcurrent and overheating. If any mishap occurs, the alarm light on the control panel illuminates and the output current is automatically turned off to protect the equipment and prolong its service life.\nIt also has electronic variable wire feed control that allows more control of the wire feed speed.\nIt is also easy to use, and is notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\n\nBrand: GREENCUT\nModel: MMG185\nWelding types: MIG - MAG - MMA\nCan be used with or without gas\nVoltage: 230V (±15%) 50Hz\nOutput: 40A/16V - 185A/23.3V\nPower factor: 0.93\nInsulation class: H\nProtection type: IP21S\nCooling: Air turboventilated\nWire diameters: 0.8mm - 1.0mm\nWire coil: 1 kg\n Power cord length: 1.6m\nGround cable length: 1.2m\nElectrode holder cable length: 1.8 m\nIt is recommended to use electrodes between 1.6 and 3.2 mm.\n\n\n1x Welder\n1x Ground cable\n1x Electrode holder clamp cable\n1x Torch\n1x Pick/brush\n1x Drive roller for 0.8mm-1.0mm lines\n2x Nozzles\n1x Welding mask\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Ground cable
1"
:2,"
2"
:"
The welding equipment accepts 0.8mm and 1.0mm diameter wire and offers professional results in welding work on metal sheets from 1mm to 2.3mm thick. It can practically work on any ferrous material: stainless steel, copper, iron, brass, titanium, carbon steel, etc.\nWith the MMG185 welding machine, safety is guaranteed thanks to the air ventilation system and protections against overvoltage, undervoltage, overcurrent and overheating. If any mishap occurs, the alarm light on the control panel illuminates and the output current is automatically turned off to protect the equipment and prolong its service life.\nIt also has electronic variable wire feed control that allows more control of the wire feed speed.\nIt is also easy to use, and is notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\n\nBrand: GREENCUT\nModel: MMG185\nWelding types: MIG - MAG - MMA\nCan be used with or without gas\nVoltage: 230V (±15%) 50Hz\nOutput: 40A/16V - 185A/23.3V\nPower factor: 0.93\nInsulation class: H\nProtection type: IP21S\nCooling: Air turboventilated\nWire diameters: 0.8mm - 1.0mm\nWire coil: 1 kg\n Power cord length: 1.6m\nGround cable length: 1.2m\nElectrode holder cable length: 1.8 m\nIt is recommended to use electrodes between 1.6 and 3.2 mm.\n\n\n1x Welder\n1x Ground cable\n1x Electrode holder clamp cable\n1x Torch\n1x Pick/brush\n1x Drive roller for 0.8mm-1.0mm lines\n2x Nozzles\n1x Welding mask\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Electrode holder clamp cable
1"
:2,"
2"
:"
The welding equipment accepts 0.8mm and 1.0mm diameter wire and offers professional results in welding work on metal sheets from 1mm to 2.3mm thick. It can practically work on any ferrous material: stainless steel, copper, iron, brass, titanium, carbon steel, etc.\nWith the MMG185 welding machine, safety is guaranteed thanks to the air ventilation system and protections against overvoltage, undervoltage, overcurrent and overheating. If any mishap occurs, the alarm light on the control panel illuminates and the output current is automatically turned off to protect the equipment and prolong its service life.\nIt also has electronic variable wire feed control that allows more control of the wire feed speed.\nIt is also easy to use, and is notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\n\nBrand: GREENCUT\nModel: MMG185\nWelding types: MIG - MAG - MMA\nCan be used with or without gas\nVoltage: 230V (±15%) 50Hz\nOutput: 40A/16V - 185A/23.3V\nPower factor: 0.93\nInsulation class: H\nProtection type: IP21S\nCooling: Air turboventilated\nWire diameters: 0.8mm - 1.0mm\nWire coil: 1 kg\n Power cord length: 1.6m\nGround cable length: 1.2m\nElectrode holder cable length: 1.8 m\nIt is recommended to use electrodes between 1.6 and 3.2 mm.\n\n\n1x Welder\n1x Ground cable\n1x Electrode holder clamp cable\n1x Torch\n1x Pick/brush\n1x Drive roller for 0.8mm-1.0mm lines\n2x Nozzles\n1x Welding mask\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Torch
1"
:2,"
2"
:"
The welding equipment accepts 0.8mm and 1.0mm diameter wire and offers professional results in welding work on metal sheets from 1mm to 2.3mm thick. It can practically work on any ferrous material: stainless steel, copper, iron, brass, titanium, carbon steel, etc.\nWith the MMG185 welding machine, safety is guaranteed thanks to the air ventilation system and protections against overvoltage, undervoltage, overcurrent and overheating. If any mishap occurs, the alarm light on the control panel illuminates and the output current is automatically turned off to protect the equipment and prolong its service life.\nIt also has electronic variable wire feed control that allows more control of the wire feed speed.\nIt is also easy to use, and is notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\n\nBrand: GREENCUT\nModel: MMG185\nWelding types: MIG - MAG - MMA\nCan be used with or without gas\nVoltage: 230V (±15%) 50Hz\nOutput: 40A/16V - 185A/23.3V\nPower factor: 0.93\nInsulation class: H\nProtection type: IP21S\nCooling: Air turboventilated\nWire diameters: 0.8mm - 1.0mm\nWire coil: 1 kg\n Power cord length: 1.6m\nGround cable length: 1.2m\nElectrode holder cable length: 1.8 m\nIt is recommended to use electrodes between 1.6 and 3.2 mm.\n\n\n1x Welder\n1x Ground cable\n1x Electrode holder clamp cable\n1x Torch\n1x Pick/brush\n1x Drive roller for 0.8mm-1.0mm lines\n2x Nozzles\n1x Welding mask\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Pick/brush
1"
:2,"
2"
:"
The welding equipment accepts 0.8mm and 1.0mm diameter wire and offers professional results in welding work on metal sheets from 1mm to 2.3mm thick. It can practically work on any ferrous material: stainless steel, copper, iron, brass, titanium, carbon steel, etc.\nWith the MMG185 welding machine, safety is guaranteed thanks to the air ventilation system and protections against overvoltage, undervoltage, overcurrent and overheating. If any mishap occurs, the alarm light on the control panel illuminates and the output current is automatically turned off to protect the equipment and prolong its service life.\nIt also has electronic variable wire feed control that allows more control of the wire feed speed.\nIt is also easy to use, and is notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\n\nBrand: GREENCUT\nModel: MMG185\nWelding types: MIG - MAG - MMA\nCan be used with or without gas\nVoltage: 230V (±15%) 50Hz\nOutput: 40A/16V - 185A/23.3V\nPower factor: 0.93\nInsulation class: H\nProtection type: IP21S\nCooling: Air turboventilated\nWire diameters: 0.8mm - 1.0mm\nWire coil: 1 kg\n Power cord length: 1.6m\nGround cable length: 1.2m\nElectrode holder cable length: 1.8 m\nIt is recommended to use electrodes between 1.6 and 3.2 mm.\n\n\n1x Welder\n1x Ground cable\n1x Electrode holder clamp cable\n1x Torch\n1x Pick/brush\n1x Drive roller for 0.8mm-1.0mm lines\n2x Nozzles\n1x Welding mask\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Drive roller for 0.8mm-1.0mm lines
1"
:2,"
2"
:"
The welding equipment accepts 0.8mm and 1.0mm diameter wire and offers professional results in welding work on metal sheets from 1mm to 2.3mm thick. It can practically work on any ferrous material: stainless steel, copper, iron, brass, titanium, carbon steel, etc.\nWith the MMG185 welding machine, safety is guaranteed thanks to the air ventilation system and protections against overvoltage, undervoltage, overcurrent and overheating. If any mishap occurs, the alarm light on the control panel illuminates and the output current is automatically turned off to protect the equipment and prolong its service life.\nIt also has electronic variable wire feed control that allows more control of the wire feed speed.\nIt is also easy to use, and is notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\n\nBrand: GREENCUT\nModel: MMG185\nWelding types: MIG - MAG - MMA\nCan be used with or without gas\nVoltage: 230V (±15%) 50Hz\nOutput: 40A/16V - 185A/23.3V\nPower factor: 0.93\nInsulation class: H\nProtection type: IP21S\nCooling: Air turboventilated\nWire diameters: 0.8mm - 1.0mm\nWire coil: 1 kg\n Power cord length: 1.6m\nGround cable length: 1.2m\nElectrode holder cable length: 1.8 m\nIt is recommended to use electrodes between 1.6 and 3.2 mm.\n\n\n1x Welder\n1x Ground cable\n1x Electrode holder clamp cable\n1x Torch\n1x Pick/brush\n1x Drive roller for 0.8mm-1.0mm lines\n2x Nozzles\n1x Welding mask\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">2x Nozzles
1"
:2,"
2"
:"
The welding equipment accepts 0.8mm and 1.0mm diameter wire and offers professional results in welding work on metal sheets from 1mm to 2.3mm thick. It can practically work on any ferrous material: stainless steel, copper, iron, brass, titanium, carbon steel, etc.\nWith the MMG185 welding machine, safety is guaranteed thanks to the air ventilation system and protections against overvoltage, undervoltage, overcurrent and overheating. If any mishap occurs, the alarm light on the control panel illuminates and the output current is automatically turned off to protect the equipment and prolong its service life.\nIt also has electronic variable wire feed control that allows more control of the wire feed speed.\nIt is also easy to use, and is notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\n\nBrand: GREENCUT\nModel: MMG185\nWelding types: MIG - MAG - MMA\nCan be used with or without gas\nVoltage: 230V (±15%) 50Hz\nOutput: 40A/16V - 185A/23.3V\nPower factor: 0.93\nInsulation class: H\nProtection type: IP21S\nCooling: Air turboventilated\nWire diameters: 0.8mm - 1.0mm\nWire coil: 1 kg\n Power cord length: 1.6m\nGround cable length: 1.2m\nElectrode holder cable length: 1.8 m\nIt is recommended to use electrodes between 1.6 and 3.2 mm.\n\n\n1x Welder\n1x Ground cable\n1x Electrode holder clamp cable\n1x Torch\n1x Pick/brush\n1x Drive roller for 0.8mm-1.0mm lines\n2x Nozzles\n1x Welding mask\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Welding mask
1"
:2,"
2"
:"
The welding equipment accepts 0.8mm and 1.0mm diameter wire and offers professional results in welding work on metal sheets from 1mm to 2.3mm thick. It can practically work on any ferrous material: stainless steel, copper, iron, brass, titanium, carbon steel, etc.\nWith the MMG185 welding machine, safety is guaranteed thanks to the air ventilation system and protections against overvoltage, undervoltage, overcurrent and overheating. If any mishap occurs, the alarm light on the control panel illuminates and the output current is automatically turned off to protect the equipment and prolong its service life.\nIt also has electronic variable wire feed control that allows more control of the wire feed speed.\nIt is also easy to use, and is notably light and compact, with an excellent weight/volume/power ratio, so that it can be transported and stored anywhere.\n\nBrand: GREENCUT\nModel: MMG185\nWelding types: MIG - MAG - MMA\nCan be used with or without gas\nVoltage: 230V (±15%) 50Hz\nOutput: 40A/16V - 185A/23.3V\nPower factor: 0.93\nInsulation class: H\nProtection type: IP21S\nCooling: Air turboventilated\nWire diameters: 0.8mm - 1.0mm\nWire coil: 1 kg\n Power cord length: 1.6m\nGround cable length: 1.2m\nElectrode holder cable length: 1.8 m\nIt is recommended to use electrodes between 1.6 and 3.2 mm.\n\n\n1x Welder\n1x Ground cable\n1x Electrode holder clamp cable\n1x Torch\n1x Pick/brush\n1x Drive roller for 0.8mm-1.0mm lines\n2x Nozzles\n1x Welding mask\n1x Instruction manual\n"
}" data-sheets-userformat="{"
2"
:12737,"
3"
:{"
1"
:0,"
3"
:1},"
9"
:0,"
10"
:1,"
11"
:4,"
15"
:"
Arial"
,"
16"
:10}" data-sheets-textstyleruns="{"
1"
:0,"
2"
:{"
3"
:"
Arial"
,"
4"
:10}}">1x Instruction manual
